Archive::Extract − A generic archive extracting mechanism
use
Archive::Extract;
### build an Archive::Extract object ###
my $ae = Archive::Extract−>new( archive =>
'foo.tgz' );
### extract to cwd() ###
my $ok = $ae−>extract;
### extract to /tmp ###
my $ok = $ae−>extract( to => '/tmp' );
### what if something went wrong?
my $ok = $ae−>extract or die $ae−>error;
### files from the archive ###
my $files = $ae−>files;
### dir that was extracted to ###
my $outdir = $ae−>extract_path;
### quick check methods ###
$ae−>is_tar # is it a .tar file?
$ae−>is_tgz # is it a .tar.gz or .tgz file?
$ae−>is_gz; # is it a .gz file?
$ae−>is_zip; # is it a .zip file?
$ae−>is_bz2; # is it a .bz2 file?
$ae−>is_tbz; # is it a .tar.bz2 or .tbz file?
$ae−>is_lzma; # is it a .lzma file?
$ae−>is_xz; # is it a .xz file?
$ae−>is_txz; # is it a .tar.xz or .txz file?
### absolute path to the archive you provided ###
$ae−>archive;
### commandline tools, if found ###
$ae−>bin_tar # path to /bin/tar, if found
$ae−>bin_gzip # path to /bin/gzip, if found
$ae−>bin_unzip # path to /bin/unzip, if found
$ae−>bin_bunzip2 # path to /bin/bunzip2 if found
$ae−>bin_unlzma # path to /bin/unlzma if found
$ae−>bin_unxz # path to /bin/unxz if found
Archive::Extract is a generic archive extraction mechanism.
It allows you to extract any archive file of the type .tar, .tar.gz, .gz, .Z, tar.bz2, .tbz, .bz2, .zip, .xz,, .txz, .tar.xz or .lzma without having to worry how it does so, or use different interfaces for each type by using either perl modules, or commandline tools on your system.
See the "HOW IT WORKS" section further down for details.
$ae =
Archive::Extract−>new(archive =>
’/path/to/archive’,[type =>
TYPE ])
Creates a new "Archive::Extract" object based on
the archive file you passed it. Automatically determines the
type of archive based on the extension, but you can override
that by explicitly providing the "type"
argument.
Valid values for "type" are:
|
tar |
Standard tar files, as produced by, for example, "/bin/tar". Corresponds to a ".tar" suffix. | ||
|
tgz |
Gzip compressed tar files, as produced by, for example "/bin/tar −z". Corresponds to a ".tgz" or ".tar.gz" suffix. | ||
|
gz |
Gzip compressed file, as produced by, for example "/bin/gzip". Corresponds to a ".gz" suffix. | ||
|
Z |
Lempel-Ziv compressed file, as produced by, for example "/bin/compress". Corresponds to a ".Z" suffix. | ||
|
zip |
Zip compressed file, as produced by, for example "/bin/zip". Corresponds to a ".zip", ".jar" or ".par" suffix. | ||
|
bz2 |
Bzip2 compressed file, as produced by, for example, "/bin/bzip2". Corresponds to a ".bz2" suffix. | ||
|
tbz |
Bzip2 compressed tar file, as produced by, for example "/bin/tar −j". Corresponds to a ".tbz" or ".tar.bz2" suffix. |
lzma
Lzma compressed file, as produced by "/bin/lzma". Corresponds to a ".lzma" suffix.
|
xz |
Xz compressed file, as produced by "/bin/xz". Corresponds to a ".xz" suffix. | ||
|
txz |
Xz compressed tar file, as produced by, for example "/bin/tar −J". Corresponds to a ".txz" or ".tar.xz" suffix. |
Returns a "Archive::Extract" object on success, or false on failure.
$ae−>extract(
[to => ’/output/path’] )
Extracts the archive represented by the
"Archive::Extract" object to the path of your
choice as specified by the "to" argument. Defaults
to "cwd()".
Since ".gz" files never hold a directory, but only a single file; if the "to" argument is an existing directory, the file is extracted there, with its ".gz" suffix stripped. If the "to" argument is not an existing directory, the "to" argument is understood to be a filename, if the archive type is "gz". In the case that you did not specify a "to" argument, the output file will be the name of the archive file, stripped from its ".gz" suffix, in the current working directory.
"extract" will try a pure perl solution first, and then fall back to commandline tools if they are available. See the "GLOBAL VARIABLES" section below on how to alter this behaviour.
It will return true on success, and false on failure.
On success, it
will also set the follow attributes in the object:
$ae−>extract_path
This is the directory that the files where extracted to.
$ae−>files
This is an array ref with the paths of all the files in the archive, relative to the "to" argument you specified. To get the full path to an extracted file, you would use:
File::Spec−>catfile( $to, $ae−>files−>[0] );
Note that all files from a tar archive will be in unix format, as per the tar specification.
$ae−>error([
BOOL ])
Returns the last encountered error as string. Pass it a true
value to get the "Carp::longmess()" output
instead.
$ae−>extract_path
This is the directory the archive got extracted to. See
"extract()" for details.
$ae−>files
This is an array ref holding all the paths from the archive.
See "extract()" for details.
$ae−>archive
This is the full path to the archive file represented by
this "Archive::Extract" object.
$ae−>type
This is the type of archive represented by this
"Archive::Extract" object. See accessors below for
an easier way to use this. See the "new()" method
for details.
$ae−>types
Returns a list of all known "types" for
"Archive::Extract"’s "new"
method.
$ae−>is_tgz
Returns true if the file is of type ".tar.gz". See
the "new()" method for details.
$ae−>is_tar
Returns true if the file is of type ".tar". See
the "new()" method for details.
$ae−>is_gz
Returns true if the file is of type ".gz". See the
"new()" method for details.
$ae−>is_Z
Returns true if the file is of type ".Z". See the
"new()" method for details.
$ae−>is_zip
Returns true if the file is of type ".zip". See
the "new()" method for details.
$ae−>is_lzma
Returns true if the file is of type ".lzma". See
the "new()" method for details.
$ae−>is_xz
Returns true if the file is of type ".xz". See the
"new()" method for details.
$ae−>bin_tar
Returns the full path to your tar binary, if found.
$ae−>bin_gzip
Returns the full path to your gzip binary, if found
$ae−>bin_unzip
Returns the full path to your unzip binary, if found
$ae−>bin_unlzma
Returns the full path to your unlzma binary, if found
$ae−>bin_unxz
Returns the full path to your unxz binary, if found
$bool =
$ae−>have_old_bunzip2
Older versions of "/bin/bunzip2", from before the
"bunzip2 1.0" release, require all archive names
to end in ".bz2" or it will not extract them. This
method checks if you have a recent version of
"bunzip2" that allows any extension, or an older
one that doesn’t.
debug(
MESSAGE )
This method outputs MESSAGE to the default
filehandle if $DEBUG is true. It’s a small method, but
it’s here if you’d like to subclass it so you
can so something else with any debugging output.
"Archive::Extract" tries first to determine what type of archive you are passing it, by inspecting its suffix. It does not do this by using Mime magic, or something related. See "CAVEATS" below.
Once it has determined the file type, it knows which extraction methods it can use on the archive. It will try a perl solution first, then fall back to a commandline tool if that fails. If that also fails, it will return false, indicating it was unable to extract the archive. See the section on "GLOBAL VARIABLES" to see how to alter this order.
File
Extensions
"Archive::Extract" trusts on the extension of the
archive to determine what type it is, and what extractor
methods therefore can be used. If your archives do not have
any of the extensions as described in the "new()"
method, you will have to specify the type explicitly, or
"Archive::Extract" will not be able to extract the
archive for you.
Supporting
Very Large Files
"Archive::Extract" can use either pure perl
modules or command line programs under the hood. Some of the
pure perl modules (like "Archive::Tar" and
Compress::unLZMA) take the entire contents of the archive
into memory, which may not be feasible on your system.
Consider setting the global variable
$Archive::Extract::PREFER_BIN to 1, which will prefer the
use of command line programs and won’t consume so much
memory.
See the "GLOBAL VARIABLES" section below for details.
Bunzip2
support of arbitrary extensions.
Older versions of "/bin/bunzip2" do not support
arbitrary file extensions and insist on a ".bz2"
suffix. Although we do our best to guard against this, if
you experience a bunzip2 error, it may be related to this.
For details, please see the "have_old_bunzip2"
method.
$Archive::Extract::DEBUG
Set this variable to "true" to have all calls to
command line tools be printed out, including all their
output. This also enables "Carp::longmess" errors,
instead of the regular "carp" errors.
Good for tracking down why things don’t work with your particular setup.
Defaults to "false".
$Archive::Extract::WARN
This variable controls whether errors encountered internally
by "Archive::Extract" should be
"carp"’d or not.
Set to false to silence warnings. Inspect the output of the "error()" method manually to see what went wrong.
Defaults to "true".
$Archive::Extract::PREFER_BIN
This variables controls whether "Archive::Extract"
should prefer the use of perl modules, or commandline tools
to extract archives.
Set to "true" to have "Archive::Extract" prefer commandline tools.
Defaults to "false".
Mime magic support
Maybe this module should use something like "File::Type" to determine the type, rather than blindly trust the suffix.
Thread safety
Currently, "Archive::Extract" does a "chdir" to the extraction dir before extraction, and a "chdir" back again after. This is not necessarily thread safe. See "rt.cpan.org" bug "#45671" for details.
Please report bugs or other issues to <bug−archive−extract@rt.cpan.org>.
This module by Jos Boumans <kane@cpan.org>.
This library is free software; you may redistribute and/or modify it under the same terms as Perl itself.